-
Continue reading →: Dual Snap Rings
I have had crank walk on a couple e50s. The clutch side bearing has has side play and when you pul the clutch the whole crank shifts a couple mm. This has caused bearing issues and an air leak on the magneto side. I cut an extra snap ring slot…
-
Continue reading →: Mag X problems
The Mag X wasnt running right. Not idling well and low power. Did a leak down test and found out the spark plug was leaking and the main bearings were bad. Time for a new head and crank bearings.
-
Continue reading →: DR kit for the hoobit and something in the rear brake.
Put a dr on the hobbit and it RIPPPS. The proma with an fmf sounds great. p.s. there was cable stuck in the rear brake. maybe thats why it sucked.
-
Continue reading →: Proma Fmf baffle FMF
I am working on a budget hobbit blaster. I got a proma for it and welded on a fmf baffle. Hopefully that should quiet it down a bit.
-
Continue reading →: XT Headlight and brake light.
I got a fleet farm headlight and a led wrap for the brake light. Works great and is super bright. I am running this moped style with out a battery.
-
Continue reading →: XT250 Tank stickers and fork cleaning
I got tank stickers for the XT and I cleaned the fork seals. The seals were leaking about 5-10 drops a day. I thought I was going to have to replace them but Graham told me about seal savers and how to make one using a milk carton. Its just…
-
Continue reading →: Tri Rad maintance.
I got the tri rad up and running for the season. I needed to center the rear sprocket. It was really off center and was causing chain issues. I also put a different engine on it. This year I went with an Airsal 70cc e50. I am planing on upgrading…
-
Continue reading →: Mag X 80
I worked on the Mag X 80 a bunch. I went thru 10 jets and removed 8 clutch balls. Its running alright and hit 34. I am goign to change the carb to a vm18 from the current vm15.
-
Continue reading →: Lazer
I finally put some work into the free spirit laser mash up. SSR Laser wheels and front end.


