-
Continue reading →: Red Magnum X Proma Exhaust
Made a Proma fit my magnum x project.
-
Continue reading →: XT250 Project
I picked up an XT 250. Runs great. Sounds like a big fart. Plans are to swap an rm80 small wheel front end, lower the rear, change seat and maybe tank, new exhaust, and get it road worthy. This is a spare frame that I am swapping things over to…
-
Continue reading →: Working on an engine swap
Lots to do yet. Just getting started. I also made a block off plate for the oil injector.
-
Continue reading →: Magnum Stuff
Working on Magnums. Big ones and little ones. Picked up a crappy Magnum XK and got it running last night. It just needed a carb clean. Still have to adjust cables and general maintance, But it should be good to go. I will have to do something about the gas…
-
Continue reading →: Pedal Pegs
Tyler came over and welded up some broken motor mounts for me and also took my pegs for modigication. . . Ended up pretty good.
-
Continue reading →: Puch Magnum Project
Picked up a 78 Magnum from an auction. Looked pretty rough. When I got it home it turned out to be in pretty good shape. It has 347 miles on it and started with fresh gas. The seat is trash so Ill have to find a new one or make…
-
Continue reading →: DIY Parts Cleaner
I didnt want to buy a parts cleaner so I decided to make one. I started with a 55 gal drum. I took the lid and cut it down to fit inside of the drum. Its going to be the shelf. I will use little spacers around the circumference of…
-
Continue reading →: Magnum X Fenders
I used a couple old fenders to make new fenders for my magnum x project. The bike didn’t come with fenders and I couldn’t track down cheap replacements. I am not sure I love the chrome. But Ill leave it on to see if it grows on me.
-
Continue reading →: Broken motor mounts and exhaust
My magnum x had a horrible vibration. It ended up braking some motor mounts and then broke the exhaust from all the vibration. It was a loud shaky ride home. Ill get this stuff all welded back together and it should be good to go.
-
Continue reading →: Sanding and Priming and Painting
I spent a lot of the weekend sanding and priming a magnum x frame and tank. I plan on making it as smooth as possible. I also used a little bondo on the tank do fill a larger dent. Sanding Priming Sanding Glazing/filling Sanding Priming Colorcoat Wet sanding Cleaning
Hello,
Corn Ped
Mopeds, Dirt Bikes, E-Bikes, Videos, Etc.
Cornped 