-
Continue reading →: Pull Start E50 Bell
I had a damaged E50 bell, one of the notches got bent. I could either bend it back and use it, or cut it off and not have a starter. Well if you have a pull start e50 you dont need the started plate. . . I cut the bell…
-
Continue reading →: Thursday Night Ride
Mounted my GoPro backwards for some great shots!
-
Continue reading →: Maxi N rebuild
My Maxi N has been great to me, I haven’t had to fix much in the last 3 years. This last month it has been rattling it self apart and breaking stuff. I had a death vibration last month and it was from a flywheel loosing its inners. Then a…
-
Continue reading →: Tri Rad Axle Bearing Repack.
I took apart the Tri Rad rear end and repacked the dried out bearings. They are smooth as butter now! Took off the axle housing Popped out the retainer and seal Then you take out this plastic bearing holder Those balls were DRY! I have a handy syringe filled with…
-
Continue reading →: Tri Rad rear end dissemble
I started taking apart the rear end to change all the rusty bolts, replace the bearings, and grease everything up. First think I noticed was all the nuts and bolts are NOT metric. I also noticed the rear diff is just a standard 3/4″ go kart diff. I am thinking…
-
Continue reading →: Tri Rad with RS 50 forks
I picked up an Aprilia RS 50 rolling chassis. Looked like the forks works could fit a puch. . . YEP! I just needed to remove the lower bearing and throw on a Puch bearing race and shim. Other than that, it fits PERFECT. This thing is fucking beefy! I…
-
Continue reading →: Picked up a Tr Rad!
3 times the rad as a normal moped! Lots of plans in the works for this beauty
-
Continue reading →: Repacking a baffle
My treats pipe was just so loud. I figured the baffling was 4 years old so I should repack it. When I took the cap off. . . there was NO fiberglass packing inside what so ever! To repack a baffle start by drilling out the rivets. See there was…
-
Continue reading →: Maxi Exhaust Mounted
Put the pipe back on my Maxi N. Jake welded a new flange on it that he had laser cut. super nice. We also changed the angle of it. I finished it off with some high temp paint. Pedals clear the pipe too! I also realized my head was on…
Hello,
Corn Ped
Mopeds, Dirt Bikes, E-Bikes, Videos, Etc.
Cornped 